
Finding the right replacement FAN for your ASIC Miner! Avalon 6, Avalon 741, Antminer S9 (S3 S4 S5 S7) , Whatsminer M3, Ebit E9
Finding the right replacement FAN for your ASIC Miner!
Most of the time when an ASIC Miner stops working, a broken fan is the root cause, other times the delivery company damaged the Miner during transport and you receive a working Miner with broken fan. Of course you have manufacturer warranty – but nobody pays you the lost mining rewards at the times when your mining gear is not operational.
Due to many questions on Bitcointalk and also some questions here we decided to write an easy guide and provide an overview where to get replacement Fans for your ASIC Miners and also show which fans can be used for replacement. Don’t make the mistake to think you can use normal computer fans for your Asic Miners cause it ain’t gonna work.
In this Guide, we will cover the fans for the following ASIC Miners: Avalon 6, Avalon 741, Antminer S3,S4,S5,S7, Antminer S9, Whatsminer M3, Ebit E9
The table below shows the airflow design, the number of fans used in the respective miner, the fan dimensions and the specs of the original manufacturer fans:
Miner |
Airflow design |
# Fans |
Fan dimensions |
Specs |
||
Avalon 6 | pull | 1 | 120x120mm x38mm | – | – | – |
Avalon 741 | pull | 1 | 120x120mm x38mm | 12VDC 2,7A | Cooler Master | A12038-60BB-4RP-F1 |
Antminer S3, S4, S5, S7 | mixed | mixed | 120x120mm x38mm | 12VDC 2,7A | Delta electronics | QFR1212GHE |
Antminer S9 | push-pull | 2 | 120x120mm x38mm | 12VDC 2,7A | Delta electronics | QFR1212GHE |
Whatsminer M3 | push-pull | 2 | 120x120mm x38mm | 12VDC 2,8A | – | KZ12038B012X |
Ebit E9 | push-pull | 2 | 120x120mm x38mm | 12VDC 2,7A | Cooler Master | A12038-60BB-4RP-F1 |
Basically, it can be summarized that all manufacturers use the same fan dimensions and nearly same fan specs at 12VDC 2,7 -2,8A and around ~180-220CFM.
In the below table I summarized some possibilities for replacement fans which are easy to get:
Miner |
Replacement Fan |
Specs |
Link* |
Alternatives* |
|||
Avalon 6 | Delta Fan DX-62 | 12VDC 1,6A – 191CFM | Parallelminer | Amazon US | Amazon US | Amazon UK | |
Avalon 741 | Sanyo Denki SAN Ace | 12VDC 3,0A – 224CFM | Amazon US | Amazon US | Amazon UK | Amazon DE | |
Antminer S3, S4, S5, S7 | – | 12VDC 1,8A – 186CFM | Parallelminer | Amazon US | Amazon US | Amazon UK | |
Antminer S9 | Sanyo Denki SAN Ace | 12VDC 3,0A – 224CFM | Amazon US | Amazon US | Amazon UK |
|
|
Whatsminer M3 | Sanyo Denki SAN Ace | 12VDC 3,0A – 224CFM | Amazon US | Amazon US | Amazon UK |
|
|
Ebit E9 | Sanyo Denki SAN Ace | 12VDC 3,0A – 224CFM | Amazon US | Amazon US | Amazon UK |
|
As you can see in table there are not that many options for replacements. There is the Sanyo Denki SAN Ace fan with 12VDC 3,0A – 224CFM and the Delta electronics QFR1212GHE fan which can in my opinion used as a replacement for all mentioned ASIC Miners (Avalon 6, Avalon 741, Antminer S9 (S3 S4 S5 S7) , Whatsminer M3, Ebit E9).
For the Avalon 6 and the Antminer S3, S4, S5,S7 there is an alternative Fan from Parallelminers which is suggested and should bring a little lower noise level.
I hope this small guide helps you to work out your fan troubles! In the future we are also going to extend our portfolio and offer some replacement fans in our shop.
If you got some questions just write a comment down below.
Cheers
Tom – Cryptouniverse
*Affiliate
2 COMMENTS
Dear Tom
Thanks for all the useful information. But none of the fan is available here in India. One of the fans in my M3 miner is not working. I tried replacing it with a S9 fan, but the error log says that the fan is running at 5650 RPM but the minimum required speed is 6000 RPM. Please help. Please write to me at [email protected].
Thanks.
hi.
my whatsminer m10 heat up to much i cant even touch the casing of the miner. should i suppose to replace the fan to higher rpm?